Anchor El Paso Epoxy FlooringAnchor El Paso Epoxy Flooring

Concrete Resurfacing & Overlays in El Paso TX - a new surface on a sound slab

Worn, stained or uneven concrete on your driveway or patio? We lay a new surface over the old slab once we know it's sound.

Services
16
Service areas
12
Close view of a gray epoxy floor coating with black, white, and gray flakes beside a plain wall.

Get your slab checked before you resurface

Send photos of the cracks with your request, and I'll check them in person on site.

Request an estimate

Can my old concrete be resurfaced instead of torn out?

Concrete resurfacing and overlays in El Paso, TX means laying a cement-based mix over your existing slab, so the old concrete stays in place under a new surface that covers wear, stains and uneven spots. It works well when the slab underneath is solid and done moving, and that's what we find out first.

Most people who call us are looking at a driveway, patio or garage floor that's flaking, stained or patched in three shades of gray, and they'd rather not pay to break it out. The price moves with the size of the area, how many cracks and broken edges need repair, whether an old sealer or coating has to come off first, which we'd handle as concrete floor stripping and removal, and how much texture or color you want in the finish. The schedule turns mostly on the slab, since cracks that may still be moving are worth checking before anyone commits, and on the weather on the days we lay the overlay. You'll see your own figure in the written estimate after I've looked at the slab.

How we handle concrete resurfacing and overlays

Before I quote an overlay, I look at every crack and check whether it's still opening, because an overlay only makes sense on a slab that's solid and done moving, and if replacing the slab is the better call, I'll tell you that instead. When the slab passes, our crew grinds and cleans the top so the new layer has bare, open concrete to grab, then fills cracks, rebuilds chipped edges and works out low spots so they don't show through. After that we mix and lay the overlay, set the texture or finish you picked, seal it when the system calls for it, and clean up before we leave.

Some slabs need a different fix. An indoor floor that's out of level is usually better served by self-leveling concrete and overlays, a flowing mix that finds its own level, than by a troweled topping. Around the water, pool deck coatings and resurfacing uses the same idea with finishes chosen for wet, barefoot traffic.

What El Paso permits mean for concrete resurfacing and overlays

In El Paso, the city's One Stop Shop takes building permit applications for work that builds, alters or repairs a building or structure, and whether an overlay on an existing slab counts is something we confirm job by job rather than assume. Driveways need a closer look when the work reaches the street, because El Paso County requires a permit in advance for driveway or sidewalk changes in the public right-of-way, the strip of public land along the road. We check with the office that covers your address before we start, and if your job needs a permit, we handle the paperwork or walk you through it if you're filing as the owner.

Around here we see a lot of driveways and back patios with oil stains, worn tops and old patches, plus pool decks that have faded or gone rough underfoot. Many are good candidates for an overlay, and the ones with cracks that keep opening get a straight answer about replacement. We meet the same kinds of slabs on jobs in Socorro and Horizon City, and we work across El Paso and the cities around it in Texas and New Mexico, so if your city isn't on our list, call and ask.

Why call us for resurfacing

  • I write every estimate myself

    I come out to look at the slab and write the estimate, so the person pricing your job is the one who knows what an overlay can and can't fix. Our own crew does the work, and I'm on the job to check the prep before anything goes down.

  • Nine years of stubborn slabs

    I learned floor coating on a crew young and started this business in 2017, and we're the ones people call for peeling floors and old coatings nobody can name. That matters on resurfacing, because what's already on a slab decides whether anything new will stick to it.

  • Licensed, insured, permits checked

    We're fully licensed and insured. We also check with the city or county office for your address before work starts, since a driveway that reaches the street can fall under the county's right-of-way permit.

Phone
(915) 265-1229
Hours
Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
Location
El Paso, TX 79901

On an overlay, what's under it matters more than what goes on top, so the first step is letting me see your slab. Your satisfaction, guaranteed. Request an estimate or call (915) 265-1229.

Get a written resurfacing estimate for your slab

Send the form and we'll reply within one business day to set a time for me to come out, look at the slab and write your estimate. The estimate is free, done on site and comes with no obligation. Photos of the surface and any cracks help me know what to look for.

Location
El Paso, TX 79901
Hours
Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
Credentials
Fully licensed and insured.

Frequently asked questions

How much does concrete resurfacing cost in El Paso?

There's no set price, because an overlay's cost rests more on the slab under it than on the overlay itself. Lots of crack repair, an old coating that has to come off or a detailed texture pushes it up, while a clean slab and a simple finish keep it down, and skipping the tear-out is usually what makes resurfacing the cheaper choice over replacement. Call (915) 265-1229 or send the form and I'll come price your slab.

How do I know if my cracked driveway can be resurfaced?

A cracked driveway can usually take an overlay if the cracks have stopped moving and the slab underneath is solid. One overlay maker builds its toppings for concrete that's structurally sound and not moving, and a resurfacer maker warns that active cracks, ones still opening or shifting, may show back through the new surface. Before you pay anyone for a new surface, ask whether they checked your cracks for movement.

What areas around a house can get a concrete overlay?

Driveways, patios, sidewalks and pool decks are the usual outdoor spots, and garage and indoor concrete floors can take one too when the slab is sound. One maker describes its textured overlays as adding slip resistance and durability on those surfaces, so ask your installer which product and texture they plan to use.

How does hot, windy weather affect concrete resurfacing?

Heat, wind, dry air and direct sun can make fresh resurfacer lose its water too early, and thin layers like an overlay take the worst of it, according to one resurfacer maker. That's why we plan the work for the cooler, calmer part of the day and keep sun and wind off the fresh surface. It's fair to ask any crew how they'll protect new work on a hot afternoon.

What causes a concrete overlay to peel or come loose?

A weak bond to the old slab is the usual cause, and that bond starts with how clean the slab is. One resurfacer maker says the surface has to be free of dust, grease, oil, dirt and curing compounds, the coatings sprayed on new concrete as it hardens, because those can weaken the bond. Ask any crew exactly how they'll clean the slab before the overlay goes on.

Is concrete resurfacing safe with kids and pets at home?

It can be, as long as kids and pets stay away from the mixing area while the crew works. One resurfacer maker notes its product contains silica, and breathing the dust may irritate the lungs or cause a lung disease called silicosis. Ask your crew how they control dust, and plan to keep little ones and animals inside until the mixing is done.

  • Self-Leveling Concrete & Overlays

    If an indoor slab dips or slopes and you want it flat for tile, coating or a clean finish, a pourable leveling mix fixes the shape before anything else goes on.

  • Pool Deck Coatings & Resurfacing

    A pool deck that's faded, rough on bare feet or patched in spots can get a new surface and texture picked for wet, everyday traffic around the water.

(915) 265-1229Request an estimate