Flooring contractor in Anthony, NM - floors built on sound slab prep
Anchor El Paso Epoxy Flooring coats, polishes and repairs concrete floors in Anthony, New Mexico, from home garages to hard-working shop floors, and we start each job by finding out what the slab underneath is doing.
Book your Anthony floor estimate
I'll look at the slab, check for moisture and old coatings, and explain your options.
Request an estimateAnthony's garages sit where the arroyos drain
Anthony is a small city on the New Mexico side of the state line, up the valley from El Paso, and on our jobs here we mostly see slab-on-grade houses with garages and carports, plus small shops and work buildings that get used hard. Plenty of those slabs have been painted, sealed or patched over the years, so the first question is usually what's already on them. We see a similar mix of homes and work slabs in Chaparral.
Water coming off the mesas and mountains runs downhill across town through arroyos on its way into the Mesilla Valley, so I pay attention to where it goes around your house. A garage that sits low or takes water at the door usually pulls moisture and salts up into the concrete, and that's what lifts a coating later, so we check for it before we plan the floor.
Working in Anthony: permits, licenses and price
Building permits in Anthony go through the City Building Inspections Department, which reviews the permits city code requires for all construction within the city. That wording is broad and doesn't name floor coatings either way, so before we start I check with the city about your address, and its answer can move the start date. If your job needs a permit, we handle the paperwork or walk you through it if you're filing as the owner. Two things are worth checking on any installer, us included. The state's Construction Industries Division licenses a company only for the kind of work its certified lead person is qualified in, and work outside that classification can get a company disciplined, so ask what the license covers. The city also requires each business to apply and pay a $40 fee per location before working in town, renewed each calendar year. We're fully licensed and insured.
Price and schedule here mostly turn on what's under the finish. The size of the floor, whether an old coating has to come off, how much crack and low-spot repair it needs and whether the slab is pushing up moisture all add labor, and the coating you choose sets the material cost and how soon you're back on the floor. I come out, look at all of that and write the estimate on site, so the number fits your slab and not a guess. Anthony is an easy drive up the valley from our base in El Paso, and we work the same way for homeowners down in San Elizario.
Services in Anthony, NM
Garage Floor Coatings
Most garages we see in Anthony are bare slabs that collect dust, oil and tracked-in dirt. We grind them open and lay a flake coating that sweeps clean.
Concrete Floor Stripping & Removal
Lots of slabs here carry old paint or sealer nobody can name. We strip it to clean concrete, because a new coating only holds as well as what's under it.
Concrete Grinding & Surface Preparation
Slabs near a garage door often carry white salts and a soft, dusty top layer. We grind down to sound concrete so the coating bites into something solid.
Commercial & Industrial Epoxy Floor Coatings
Shops, small businesses and farm buildings around Anthony need floors that handle equipment, spills and steady traffic. We build heavier epoxy systems and work around your hours.
Read more about Commercial & Industrial Epoxy Floor Coatings
Polyaspartic Floor Coatings
Many Anthony households park in the garage every day and can't spare it for long. Polyaspartic cures faster than standard epoxy, so we suggest it when downtime matters most.
Terrazzo Flooring
Some older homes and shops hide terrazzo under carpet or tile, and it's usually worth saving. Our terrazzo flooring crew patches and polishes it back to a bright floor.
Get an on-site floor estimate in Anthony
Tell us a little about your floor in Anthony, and we'll reply within one business day to set up a visit. I come out myself, look at the slab and write your estimate on site. It's free, and there's no obligation to book.
- Phone
- (915) 265-1229
- Location
- El Paso, TX 79901
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
- Credentials
- Fully licensed and insured.
What Anthony homeowners can count on
We're based in El Paso, TX, and our crew covers 16 services across 12 service areas on both sides of the state line. Every estimate is a free quote on site.
- Based in
- TX
- El Paso
- Services
- 16
- Service areas
- 12
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Frequently asked questions
How much does an epoxy garage floor cost in Anthony, NM?
We price each Anthony garage floor after seeing it, because the slab's condition and the system you pick set the cost more than anything else. A flake epoxy over clean concrete is usually the plainer choice, while polyaspartic, metallic epoxy or polished concrete each bring different material and labor, and I'll lay those trade-offs side by side at the estimate. The visit is free, so you'll have a real number before you decide.
Can I pull the permit myself as a homeowner in Anthony, NM?
New Mexico lets residential property owners get a homeowner's permit within limits the state sets, and other permits go to contractors the state currently licenses. The city lists a Construction Permit Application on its forms page for new work, alterations and repairs. If you'd rather file it yourself, I'll walk you through it, and if not, we handle the paperwork.
What causes a garage floor coating to peel in Anthony?
Most peeling floors I look at failed at the prep, not the coating, because the epoxy went over dust, an old sealer or a slab that was pushing up moisture. Hot tires can lift a thin coat that never bonded well, and moisture from below can blister even a good one. That's why we grind to open concrete and test first, and I'd tell you to ask any installer how they prep before you ask about color.
How do I know if my concrete slab has a moisture problem?
The usual signs are white powder on the surface, dark patches that come and go, or an old coating that bubbles or lifts near the walls and door. You can tape a square of plastic sheeting to the floor and lift it later, and if the concrete underneath has darkened or beaded up, moisture is coming through. I test for it at the estimate, given how water drains across town here, and if a slab isn't ready, I'll say so.
How long does a concrete floor coating job take in Anthony?
The time on site depends on what your slab needs, so I give you a schedule with the estimate instead of a stock answer. A clean, sound slab goes quickly, while stripping an old coating, filling cracks or dealing with moisture adds time. The coating you choose also decides how soon you can walk and park on it, because each maker sets its own cure times and we follow them.
Does a flooring contractor from El Paso, TX work in Anthony, New Mexico?
Yes, we're based in El Paso and work across the city and the cities around it in Texas and New Mexico, Anthony included. Working across the state line just means checking with a different office before we start, which we do on every job. If you don't see your city on our list, call (915) 265-1229 and ask.
Tell us about your Anthony floor
Call (915) 265-1229 or use the form, tell us what the floor is doing, and I'll come out ready to look at the right things.