Flooring contractor in Horizon City, TX - coatings that start with the slab
Anchor El Paso Epoxy Flooring coats, polishes and repairs concrete floors in Horizon City, TX, from attached garages and patios to shop floors, and we take on the peeling coatings and odd slabs that need some figuring out.
Book an estimate for your Horizon City floor
We check the slab for old coatings, cracks and moisture before we suggest a system.
Request an estimateHorizon City: newer houses, builder-finished garages
Most of what we see in Horizon City is subdivision housing, street after street of one- and two-story homes on concrete slabs with an attached two-car garage, plus small shops and businesses along the main roads. A lot of those garage floors are still the plain gray concrete the builder poured, and some carry a roll-on kit or a clear sealer that a previous owner put down and that's now lifting where the tires sit.
We see the same thing next door in Socorro, and it shapes the job more than people expect. A newer slab often looks clean, but a smooth finish or an old sealer gives a coating nothing to grab, so we grind it open before anything goes down.
Working in Horizon City: permits, prep and price
Home work in Horizon City runs through the Town's Building Services Department, which issues construction permits and is also in charge of business permits, so it's the office to ask about any contractor working here, us included. Whether your floor needs a permit is that department's call, so we check with them before we start, and if it does, we handle the paperwork or walk you through it if you're filing as the owner. When a permit is needed, it and any inspection can set the start date, so we plan the install around them.
Past the paperwork, the price on a Horizon City floor follows what's already on it. Bare builder concrete takes less prep than a slab under a peeling kit we have to strip, and cracks, pitting, moisture coming up through the slab, the size of the space and the system you choose, whether flake, metallic or polished, all move the number. The schedule turns on the slab as well, and I'll tell you plainly if it isn't ready for a coating yet. I come out, look at the floor and write the estimate, so that's where your own figure comes from. We do the same work in Chaparral, NM and Homestead Meadows North, so if you're comparing notes with family nearby, the prep questions are the same.
Services in Horizon City, TX
Garage Floor Coatings
Most garages here are bare builder concrete or a peeling roll-on kit. We grind the slab open, fill the cracks and lay a flake coating built for tires.
Polyaspartic Floor Coatings
Families who can't give up the garage for long ask about polyaspartic. It cures faster than standard epoxy, so our crew preps carefully because it grabs quickly.
Metallic Epoxy Flooring
Some homeowners want more than gray in a game room or shop. Our metallic epoxy gives a swirled, glossy finish that shows every flaw beneath, so prep comes first.
Concrete Floor Stripping & Removal
Previous owners here often left a coating nobody can name, and it's letting go in patches. We work out what it is, strip it to bare concrete and start clean.
Polished Concrete Flooring
Small shops and offices on slab floors here need a surface that takes daily foot traffic. We grind and polish the concrete itself, so there's no coating to peel later.
Pool Deck Coatings & Resurfacing
Backyard pool decks here crack, wear thin and turn slick over the years. We repair the concrete and resurface it with a textured coating meant for bare feet.
Get a floor estimate for your Horizon City home or shop
Send the form or call, and we'll reply within one business day to set a time to come out to your Horizon City address. I look at the floor myself and write the estimate, which is free and comes with no obligation. If you go ahead, our own crew does the work, and I'm on the job to check the prep before anything goes down.
- Phone
- (915) 265-1229
- Location
- El Paso, TX 79901
- Hours
- Mon–Fri: 7 AM–10 PM, Sat–Sun: 6 AM–11 PM
- Credentials
- Fully licensed and insured.
What Horizon City owners can count on
We're a flooring contractor based in El Paso, TX, offering 16 services across 12 service areas, and Horizon City is one of them. Every quote is free and done on site.
- Based in
- TX
- El Paso
- Services
- 16
- Service areas
- 12
- Fully licensed and insured.
- Free quotes on site.
- We reply within 1 business day.
Frequently asked questions
Do I need a permit for an epoxy garage floor in Horizon City?
That's for the Town's Building Services Department to say, because its residential permit list names work like re-roofs, fences, driveways and sidewalks, says it isn't limited to those and doesn't mention floor coatings. We check with the department before we start on your floor.
How do I schedule a building inspection in Horizon City?
Call Building Services at 915-852-1875 by 4:00 PM the day before you want the inspection. Cancellations are called in the same way, by 4:00 PM the day before. When a floor job needs an inspection, we line our schedule up with that cutoff.
Does my electrician need to register with the Town of Horizon City?
Yes, the Town requires all electrical, plumbing and mechanical contractors to register, and it keeps a copy of each one's master's license on file. An unregistered contractor can be refused a permit, an inspection or both, and a project with electrical, plumbing or mechanical work needs a separate permit for each system, so if your garage job adds outlets or lighting, ask your electrician to confirm they're registered.
Can I apply for a building permit online in Horizon City?
Yes, the city's Online Permit Center lets you apply for permits, check an application's status, pay fees and upload documents. That's handy if you're filing as the owner, since you can follow the application without a trip to City Hall.
What adds to the cost of a floor coating in Horizon City?
Prep and any permit fees are the two local things that add to it. If Building Services requires a permit, work needing one inspection carries a fee of at least $70 and work needing two runs $140 and up, and starting regulated building or electrical work before the permit is issued means paying the regular fee plus an equal amount. Past that, the price follows the slab and the system, which I lay out in the estimate.
How long is a building permit good for in Horizon City?
A Horizon City permit expires 12 months from the day it's issued, and it becomes invalid sooner if work hasn't started within 180 days or stops for 180 days once it's underway. When a floor job needs one, we time the permit to the install so it doesn't run out on you.
Call about your Horizon City floor today
Ask any installer how they'll prep your slab, then call us and hear our answer.